Reference Monitors
- Blow 5
- Blow5D
- Blow 5# [sharp]
- Blow 4
- Blow4D
- Blow4# [sharp]
FireWire Audio Interfaces
- DeuX
- Windy6
USB Audio Interfaces
- UAX2
- Amon
PCI Audio Interfaces
- Quartet
- M49 USB Midi Controller
- UFO# [sharp]

Welcome to INFRASONIC website.
Amon USB 2.0 Audio Interface
Products > USB Audio Interfaces > AMON

Mic Preamp. Line Level adjustments. MIDI I/O. USB 2.0.

Available from
Infrasonic Dealers

Your Portable USB Recording Studio. From INFRASONIC, a leading worldwide provider of digital musical instruments, comes the AMON USB recording interface. AMON is a two channel USB interface that can features a high quality microphone preamp, a line level/instrument input, and MIDI I/O.

The AMON is well suited to portable recording -- the AMON requires no extra power cables or wall outlets because it is USB-bus powered. It supports data transfer speeds of up to 480Mbps for effortless recording. The signal to noise ratio exceeds 100 dB. With a full list of features and a reasonable price, the AMON is one of today's best values in USB interfaces. Like all of INFRASONIC's products, the AMON comes with a one year manufacturer's warranty.

  • 2-in/2-out USB 2.0 High-Speed audio interface
  • Supports up to 24-bit/96kHz
  • Small design featuring a heavy duty aluminum case
  • Supports zero latency direct hardware monitoring
  • ASIO2.0, MME, DirectSound and Core Audio supports
  • Windows® XP/VISTA or later, Mac OS 10.3 or later

Amon Black

Amon Box

Amon USB 2.0 Audio Interface



  SAMPLE RATE   44.1, 48, 88.2, 96 kHz

  Input type   Line input 1,2
  Connector type   1/4" TS phone jack
  Peak level   0dBFS @ +6dBV
  Impedance   About 10Kohm

  Input type   MIC input for dynamic microphone
  Connector type   1/4" TRS phone jack
  Preamp gain   +60dB (TBD)
  Peak level   0dBFS @ 20Mv
  Impedance   About 1Kohm

  Input type   High impedance input for instrument
  Connector type   1/4" TS phone jack
  Peak level   0dBFS @ +0dBV
  Impedance   About 1Mohm

  Output type   Line output 12
  Connector type   1/4" TS phone jack
  Peak level   +0dBV @ 0dBFS
  Attenuation   -64dB ~ +0dB(0.5dB step size)
  Impedance   Less than 30ohm

  Output type   Headphone amplifier
  Connector type   1/4" TRS(stereo) phone jack
  Load impedance range   32-300ohm (for the best performance)
  Output power   60mW @ THD<0.1% ; Vpp = 3.5V


  SAMPLE RATE   44.1, 48, 88.2, 96 kHz

  A/D Converter
  SNR   102dBA(0dB @ fs=48kHz)
  Dynamic range   102dBA
  THD   -97dB(1kHz, 0dBFS)
  Interchannel Isolation   100dB

  D/A Converter
  SNR   108dBA(0dB @ fs=48kHz)
  Dynamic range   108dBA
  THD   -97dB(1kHz, 0dBFS)
  Interchannel Isolation   100dB


  USB   USB2.0 high speed format
  MIDI   MIDI in and MIDI out ports (DIN-5pin)

Minimum System Requirements


Intel Pentium 4 or equivalent and
Compatible CPU
512MB of RAM
One available USB port
Microsoft Windows® XP/VISTA or later


Macintosh with G4 or better processor
512MB of RAM
One available USB port
Mac OS 10.3 or later

INFRASONIC, WINDY6, BLOW5, BLOW5D, BLOW4, BLOW4D, INFRASONIC DeuX, INFRASONIC AMON, INFRASONIC Quartet, JamMate and SIMS Audio are trademarks of SIMS Corporation. All other trademarks remain the property of their respective owners.


Copyright © 2023, SIMS Corp. All Rights Reserved / Mail: Privacy Policy | Terms & Conditions | Other Sites : SIMS | JamMate | Clive    [Admin]