Drivers
Manuals
Brochures
Wallpapers
FAQ
FAQ
Support Tickets
Warranty
RMA
Product Registration
 

 
 
Welcome to INFRASONIC website.
Support Tickets
Support > Tickets



¤ýName Al
¤ýDate 30-08-2011 (Tue)
¤ýcategory Quartet
¤ýSerial No SMC090900222
¤ýBrand INFRASONIC
¤ýModel Quartet
¤ýCountry Russia
¤ýE-mail aavworld@gmail.com
¤ývote: 0  ¤ýhit: 13125      
Windows 7 x64 states that some of drivers are not signed
Hi !

I've installed latest Quartet drivers v. 1.24.10.
But windows isn't going to enable device because of wrong (or missing ?) signature in some of Quartet drivers.

For now I've tried to bypass windows drivers' signing check (pressing F8 before OS boot). This way Quartet works OK.

Please help _)
 
name icon Admin
2011-09-01 08:54
Dear Al,

Thank you for contacting us.
Please download the latest driver again. If you have unzipped the archive, right click the installer and select the Run as Administrator option. If it prompts you for allowing non WHQL driver usage, just say yes during the installation.
I hope this helps. I shall be pleased to provide further assistance if it is required.
Thank you for allowing us to be of service to you.

Best Regards,
SIMS Corp.
   
name icon Al
2011-09-02 01:32
¡¶Re¡·Admin,
Well, I've fulfilled your instructions but they were out of success - I've got the same results as were described in my first post.

Windows shows that following files aren't signed:
asioqua64.dll,
ctlqua64.exe,
wdmqua64.sys,
asioqua.dll.

Can send you screenshots if needed.

So for now I have to disable windows drivers signing check - not the right way to bypass troubles ... )

Thank you in advance.
   
name icon Admin
2011-09-06 08:45
Dear Al,

Thank you for your reply.
Driver signing enforcement should have been disabled by a Windows update a long time ago. Please make sure that all available updates are installed for your Windows version.
If it doesn't help, please disable UAC (User Account Control). You can do that in the control panel by pulling down the slider setting to the bottom and see if it is still asking for driver signature.
In case it does, please open up a command prompt (cmd) with Administrator rights and enter the following:
bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS
(DDISABLE is not a typo)
I hope this helps.
Are you using a RC version by any chance?
I'm looking forward to your feedback. Thank you.

Best Regards,
SIMS Corp.
   
 

Amon

Deux

UFO

Windy6

M49

Quartet

UAX2
INFRASONIC
No Category     Subject Date Hit
45 Quartet Recording with cubase SX [2] 2011-09-03 9939
44 Quartet Windows 7 x64 states that some of drivers are not signed [3] 2011-08-30 13125
43 Quartet Quartet 1.24.10 Win7x64 [1] 2011-08-09 12490
42 Quartet PAD settings [1] 2011-08-09 10571
41 Quartet identify missing part of card, please [3] 2011-08-07 8861
40 UFO not work UFO signal directly [1] 2011-08-06 8518
39 Quartet Quartet & v1.24.10 drivers in XP positive news [1] 2011-08-03 10630
38 Quartet User Manual for Audio Interface Panel [2] 2011-07-22 10606
37 Quartet Quartet GUI 1.24.08 Nightmare! [1] 2011-07-15 12368
36 Quartet Right channel of stereo output 1 defect [1] 2011-07-14 10408
35 M49 Firmware doesn't work! [2] 2011-07-08 10506
34 M49 M$( not mpping with Fruity Loops 10 [1] 2011-07-06 12609
33 Amon Amon in Windows7 64bit [1] 2011-06-19 13601
32 Quartet GUI bug [1] 2011-06-14 12420
31 M49 M49 editing software "Midi In Device Timeout" [3] 2011-06-05 13541
30 Windy6 Device Fails to start aftere failed firmware upgrdae [1] 2011-06-03 10323
29 Quartet Stuttering during first windows session [1] 2011-05-31 11586
28 Quartet 1.24.08 Bug report [1] 2011-05-24 11248
27 Windy6 Win7 x64 can¡®t find my card and the card dead after i tried to upgrade the firmware [1] 2011-05-14 8798
26 Quartet MME support / Win 7 32-bit [1] 2011-05-14 9608
1,,,111213
 

Copyright © 2024, SIMS Corp. All Rights Reserved / Mail: tech1@simsaudio.com Privacy Policy | Terms & Conditions | Other Sites : SIMS | JamMate | Clive    [Admin]